Temperature And Humidity - Vinotemp WINE-MATE WM-1500HTD Installation, Use & Care Manual

1. Use of the controller
Fig. 3.1 TEMPERATURE CONTROLLER
1) Keys
SET: To display target set point; in programming mode it selects a parameter or
confirm an operation.
(DEF): To start a manual defrost.
(UP): To see the maximum stored temperature; in programming mode it
browses the parameter codes or increases the displayed value.
(DOWN): To see the minimum stored temperature; in programming mode it
browses the parameter codes or decreases the displayed value.
: To turn on/off the power to the unit.
+ : To lock/unlock the keypad.
SET+ : To enter in the programming mode.
SET+ : To return to the temperature display.
2) Lock and unlock the keys
To lock the keys, press up + down keys
the keys, press up + down keys
3) Display
During normal operating conditions, the display shows the value measured by
the air regulation probe. In case of active alarm, the temperature flashes
alternately to the code alarm. The LED functions are listed as follows.
LED

Temperature and Humidity

+ until PON is displayed.
MODE
ON
Flashing
ON
ON
Flashing
ON
ON
Flashing
- 12 -
+ until POF is displayed; to unlock
FUNCTION
Compressor enabled
Anti-short cycle enabled
Defrost cycle enabled
Fan enabled
Fan delay after defrost enabled
Alarm occurring
Temperature measuring unit
Programming mode