Toshiba Strata CIX Call Router Installation Manual page 18

Call Router
Tab Options
Once you have defined how Call Router should handle a new call, enter the Voice Assistant Script
with Parameters as instructions to Voice Assistant for processing. This, of course, is not necessary
if you have chosen to Never send calls to Voice Assistant. Press the Edit button for Run Voice
Assistant Script to bring up the Edit Destination dialogue box:
Voice Assistant radio button will be the only one enabled since this destination information has to
be a Voice Action Script. Enter the Script number and the necessary parameters and a description
of the script (optional) press OK.
Click on the Std Scripts button to display the Standard Voice Assistant Scripts that are installed
with Call Router.
See the Voice Assistant Operations Manual for more information.
Default Phone Numbers
Important!
Enter the intercom extension number and Press OK.
Related information: See
12
This field should be programmed to the extension number where calls should be
routed when no other destination is known. That is, when all the search paths that
the user has programmed have been exhausted and still no destination has been
defined, Call Router will send the call to this destination. This Default Phone Number
must be an intercom extension on the phone system; make sure that it is a valid one.
To enter the extension number, press the Edit button for Default Destination.
"Special "Unknown Caller" Record" on page 36.
Call Router Installation Guide 03/09