Strata Cix670 Rack Mount; Basic Specifications - Toshiba Strata CIX40 General Description Manual

Strata CIX670
CIX670 Remote Expansion Cabinet

Strata CIX670 Rack Mount

The Strata CIX Rack Mount cabinets consist of a Base cabinet
(CRSUB672A) and Expansion cabinets (CRSUE672A). These
cabinets are deeper, narrower, and designed specifically to fit
standard (customer-supplied) 19" racks (shown right). The
cabinets are made of plated sheet metal, dark gray in color with
black cover plates. These cabinets support the same features as
the floor/wall-mountable CIX670 cabinets.
A CIX670 system can expand from one to seven cabinets
using the same processors and interface cards as the CIX670
floor/wall-mountable cabinets. The power factors and slot
configuration rules are also the same as the floor/wall-
mountable CIX670.
The difference between the floor/wall mount and the rack
mount cabinets is the size for the Base and Expansion cabinets,
the power supply that is installed in the cabinets, and a unique
power strip for rack mount cabinets (BRPSB120A and the
240V version).
Toshiba does not support mixing the floor/wall-mountable
CIX670 cabinets with the rack mountable cabinets. The 19
inch-wide rack and rack screws must be supplied by the dealer.
Interface cables plug into the front of the station and trunk
cards and fold under each cabinet to exit the rear of the
cabinets.

Basic Specifications

The following table lists the parts and basic specifications of the CIX670 Rack Mount Cabinets.
Dimensions of Base (CSRUB672A)
and Expansion (CSRUE672A)
Weight of Base and Expansion
Power Supply Unit (PSU)
19" Rack Installation Dimension
Optional Equipment
1. Power strip boxes for floor/wall-mountable cabinets cannot be used for Rack Mount cabinets.
2. Reserve batteries are connected using the same battery distribution box and battery cables as the CIX670
floor/wall-mountable cabinets.
34
Cabinet
Cabinet
Installation
Reserve Power Battery Distribution Box
Height: 10.5 inches (267mm)
Width: 1.58 feet (483mm—with bracket)
Depth: 1.17 feet (358mm)
22.04 lbs. (10 kg)
BRPSU672A (initially built in) – can also be ordered for spares
IEC297-1 (EIA RS 310-D)
465.1mm (front face screw pitch – width)
Cannot be floor or wall mounted.
1
Power Strip Box
From PSU to Battery Cable
From BBDB to Battery Cable
AC240V Power Supply Cord
BRPSB120A
BRPSB240A
2
BBDB1A
PBTC1A-3M
BBTC1A-2.0M
BACL240A
Strata CIX General Description 12/07