Power Over Ethernet - Toshiba Strata CIX40 General Description Manual

Analog CO Line Interface Compatibility
To provide optimum voice quality of IP telephones and Strata Net IP networks on Strata CIX
systems, there are some compatibility requirements that must be followed when using analog CO
line cards in the system.
• Toshiba highly recommends only using RCOU3A, RCOS3A, BCOCIU1A, BCOCIS1A,
REMU2A (two-wire/four-wire), REMU1A (four-wire), RDDU2A, and RGLU3A analog CO line
interfaces in IP phone and Strata Net IP applications. These circuit cards provide optimum speech
quality for Toshiba IP telephones.
• Do not use RCOU1A, RCOS1A, REMU1A (two-wire), RDDU1A, RGLU1A, or RGLU2A
analog CO line interfaces in IP telephone applications. These circuit cards will work, but will
cause IP telephone users to experience unacceptable voice quality and echo return loss.
• CIX40 Base cabinet CO lines, GCDU1A, GCDU2A and GCOCIH1A circuit cards provide
optimum speech quality for Toshiba IP telephones.

Power Over Ethernet

System Availability: All systems
Toshiba has a strategic relationship with SMC to re-
sell the 24-port, 802.3af certified SMC6824MPE
PoE switch (shown right) through authorized
Toshiba dealers.
The SMC6824MPE PoE switch is sized and priced
to fit well with Strata CIX systems to serve
applications in which customers want to power their
IP telephones over Ethernet, instead of using local power with each IP telephone. This switch
works with the IPT 2000-series telephones.
Notes
• The 2000-series IP telephones require local power for operation unless connected to a LAN
that has been equipped with special equipment to provide telephone PoE. The AC adapter
(model BADP120-1A) supplied with it powers the telephone and is included in the price.
Strata CIX General Description 12/07
Figure 26 SMC6824MPE PoE Switch
Features
IP Telephony
133