Built-in Ethernet Connection
The ACTU processor has an on-board Ethernet 100Base-T Ethernet interface for connection to
Open Architecture Computer Telephony Interface (CTI) applications. This provides extensive call
control and telephone support for CTI applications. The Ethernet Network Interface Card (NIC)
port also enables connection to the following:
• CIX Attendant Console
• ACD server
• Local and Remote eManager PC
• Soft Key Control of Voice Mail features
CIX100 Processor Optional Subassemblies
Optional subassemblies can be attached to the ACTU3A-S or ACTU3A processors to provide
additional features. The subassemblies are:
• AMDS (Modem) – Provides a 33.6Kbps/V.34 modem for point-to-point local or remote
connection to the eManager administration PC.
• BSIS (Serial Port Interface) – Provides up to two RS-232 interface ports for SMDR interface
to Call Accounting devices, SMDI or Toshiba Proprietary interface to Voice Mail devices, and
two future applications.
CIX100 Cabinet Slots
Base Cabinet
The Base Cabinet has one dedicated slot used for the system processor card and four universal
slots (S101~S104), that can accommodate station, line or option circuit cards. It also houses a
power supply that is packaged with the cabinet.
Expansion Cabinets
One expansion cabinet has four universal circuit card slots (S105~S108) that can accommodate
station, line or option circuit cards. It also houses a power supply that is packaged with the cabinet.
Figure 4
Base and Expansion Cabinet Interior
Strata CIX General Description
DC POWER
DC
AC
S101
S102
S103
S104
C
US
49L7
E88891
TIM
12/07
DC POWER
DC
AC
TOSHIBA
AMAUE1A
S105
S106
S107
S108
6576
Strata CIX100-S / CIX100
CIX100 Cabinet Slots
21