Cix200 Pcbs; Pcb Option Considerations; Common Control Processor Unit (Lctu) - Toshiba Strata CIX40 General Description Manual

Strata CIX200

CIX200 PCBs

CIX200 PCBs
Two circuit cards are specific to the CIX200 systems; the LCTU processor card and the LSLU, a
two-circuit, single-line, telephone interface card. The MIPU24 IP interface card with 24 channel
works with the CIX200. The LIPU, an IP interface with 16 resources expands to 32 with the LIPS
expansion card and works on all CIX systems.

PCB Option Considerations

Strata CIX PCBs can be configured for a variety of hardware and software options. Hardware
options are defined as either internal (generally related to optional PCB subassemblies) or external
(related to connection of peripheral equipment such as background music, voice mail, etc.).
Some PCBs must have hardware options, such as jumpers or switches, set prior to installation of
the PCB in the cabinet.

Common Control Processor Unit (LCTU)

The system operates with the LCTU processor PCB that installs in a dedicated slot of the Base
Cabinet. The Strata CIX200 processor has the following standard components built in:
• SmartMedia memory card interface. A SmartMedia flash memory card can be inserted to
backup and restore customer program data. It also makes it easy to upload operating system
data for software upgrades and maintenance functions.
• One Music-on-hold/Background Music Interface is provided by an RCA jack and a volume
control that are built into the processor to interface with a Music-on-hold and/or Background
Music source. Up to 15 MOH/BGM sources are supported by adding up to two BIOU option
cards, each provides three MOH/BGM input sources, and a BSTU card that provides up to
eight MOH/BGM input sources. MOH/BGM source volume adjustment is controlled by
software programming.
• Network Interface Card (NIC) Ethernet 100Base-T Ethernet port for IP management and
connection to Open Architecture Computer Telephony Interface (CSTA) applications. This
provides extensive call control and telephone support for CTI applications.
• 16 built-in DTMF receivers (five or more DTMF receivers require licenses).
• 16 built-in Busy Tone (BT) detectors for Auto Busy Redial (ABR).
• 64 built-in conference circuits.
• Built-in, adjustable, digital volume PAD technology enables audio volume to be adjusted in
eight steps to compensate for conference and/or CO line network losses.
• Page connector – External Page interface.
• Relay connector – Relay Control interface.
• Memory Protection Lithium Battery that protects data and the customer's programmed
configuration from memory loss. This information will be maintained in a powerless system for
at least six years.
Optional subassemblies can be added to the LCTU processor PCB to enable system expansion and
provide additional features. The subassemblies are:
BSIS interface PCB attaches to the LCTU to provide up to four RS-232 interface ports for
SMDR Call Accounting, and SMDI or Toshiba Proprietary Voice Mail interface.
AMDS (Modem) – Provides a 33.6Kbps/V.34 modem for point-to-point local or remote
connection to the eManager administration PC.
26
Strata CIX General Description 12/07