I/O Device Setup; Specified Traffic Reports (Program 922) - Toshiba Strata CIX Programming Manual

Traffic Measurement and Reporting

I/O Device Setup

I/O Device Setup
For TM output to an external device, set the I/O Device.
1. In eManager go to Advanced Configuration > System > I/O Device. (Program 803)
2. In (00) Logical Device No. select 600-traffic Report.
In (01) Device Connection select LAN or RS232.
3. If set to LAN go to Step 5. If set to RS232c go to Step 6.
4. Select an unused index number. If the TM output will be to an Rs232c port choose an index
number in the range 1 ~ 4.
5. Select the LAN Device tab. In (00) LAN Port Index No. click on List. Select the Index Number
chosen in Step 3. Set:
(01) Protocol - TCP
(03) Data Flow - Asynchronization
(05) Client IP - IP address of the Traffic
Measurement applicationor application PC
(07) Read Retry No. - 1 (default)
Go to Step 7.
6. Click on the RS232 Serial Port tab. (Program 804) Select the (00) BSIS port (1 ~ 4) assigned in
Step 3. Set:
(01) Port Speed - Baud rate of the TM device (02) Port Parity - TM device parity
(03) Data Bits - TM device data bits
(05) Wait Timer - Number of seconds to wait for
connection to TM device (0 ~ 255) (0 = permanent)
7. Setup is complete. Click on Submit.

Specified Traffic Reports (Program 922)

Traffic Reports are a summary of the Traffic Measurement data (Program 922). Traffic Reports are
stored as a file named TRAFFIC.TRF, written to the SD/SM card. The SD/SM card must be inserted
in the processor car before executing this program. The SD/SM card can store one Traffic Report.
If a report is on the SD/SM card when another report is started, the new report will overwrite the
old report. The TRAFFIC.trf file will be mixed in with the YYMMDDHHNN.trf files.
1. In eManager go to Utilities | Operations | Traffic Reports.
2. (FB01) Start - To start a report. Cancel - To stop a report that is running.
3. (FB02) First Date - The first day of TM data to be included in the report. Traffic Report Start
Time - The First hour of the first day of TM data to be included in the report.
4. (FB02) Last Date - The last day of TM data to be included in the report. Traffic Report Stop
Time - The last hour of the first day of TM data to be included in the report.
5. (FB04) Report Status - No entry. This is a status display.
6-10
(02) Application Type - Client
(04) Server Port No. - 0 (default)
(06) Client TCP Port No. - 5050
(08) Write Retry No. - 1 (default)
(04) Flow Control - Flow
Strata CTX Application Implementation Vol 3 10/07