Installation; User Levels; Configure My Phone Manager; Step 1: Configure Users - Toshiba Strata CIX Programming Manual

Installation

Note
You need to uninstall any existing My Phone Manager software before starting this
procedure.
1. Insert the CD-ROM into the CD-ROM drive. The Installation screen displays.
2. Click Install My Phone Manager and the installation begins.
3. Follow the installation instructions on the screen.
4. Click Finish when the installation is complete. The system reboots.
Notes
The installer automatically creates the Default Web Site virtual directory
l
"MyPhoneManager."
The installer automatically registers all necessary components.
l

User Levels

There are three levels—normal, Super1 and Super2 (not currently supported). The levels are
assigned in the My Phone Manager Level field in the Station Assignments screen of eManager.
Note
The Super1 user is not the System Administrator of the program. The Super1 user is
someone located in the company who can be assigned to take care of day-to-day
operations such as system speed dial and account codes, etc.
The Normal level allows the user to view all menu options except Account Code and DISA Code.
In addition, there are two screens where additional fields are only available to the Super1 user.
The Super1 level allows the user to view all menu options including the Account Code and DISA
Code. The Super1 user also has access to additional fields on the following screens enabling the
editing of those screens—Advisory Message and System Speed Dial screens.

Configure My Phone Manager

Step 1: Configure Users

1. From the eManager Main Menu, click Advanced Configuration > Station > Assignments. The
Assignments screens display.
2. Click Basic tab.
3. Choose the DN from the list at the right side of the screen and click Refresh. The screen that
displays is Program 200 Station Data for DKTs or SLTs or Program 260 Full IP Station
Assignment for IP-VM or IPTs.
Strata CTX Application Implementation Vol 3 10/07
My Phone Manager™
Installation
1-3