Toshiba Strata CIX Programming Manual page 40

FeatureFlex™
Customizing Feature Applications
Table 2-1 Field Definitions
Field
Secondary Destination
Number
Check Security Code
Enable Simultaneous Ring
Secretary's Phone Number
Feature Key Number
VoiceMail Erasing String
Note
User Information – From the Telephone
If a caller calls your extension, both telephones ring.
To accept the call, either
•
Press 1 (if there is no security code enabled), or
•
Enter the security code (if this is enabled).
Simultaneous Ring – Using My Phone Manager
You can also use My Phone Manager to set up to set up the secondary destination.
Follow these steps:
1. Log in to My Phone Manager.
2. Click FeatureFlex from the left panel.
3. Click Simultaneous Ring, or click Edit.
4. In the Secondary destination field, enter the cell phone, home number, or station that you want
to ring simultaneously with the desk telephone.
5. Click OK.
2-18
The other phone will ring simultaneously when the desktop rings.
If this box is checked, user must enter Mailbox password before line gets connected.
If this box is checked Simultaneous Ring is enabled.
Enter the secretary's phone number
The feature key of secretary's phone; if the Simultaneous Ring is enabled, this LED
will be turned on.
If Simultaneous ring application calls the cell phones as the secondary phone, the
call may be immediately connected to the voice mail. In this case, application
prompt may be recorded as the voice mail. To avoid leaving an unnecessary voice
message, please specify the digit string to delete the voice mail. "," can be used for
the pause.
If it is blank, it is automatically configured for Cingular (#311).
Secondary Destination Number can be any destination including a cell phone, extension in
another node. When a PSTN number is used, do not add long distance prefix (1) or LCR
access code.
Description
Strata CTX Application Implementation Vol 3 10/07