Air Supply Cylinder Safety Tips - Tippmann A-5TM E-GRIPTMKIT Owner's Manual

E
Whether you have a new or used refillable air or CO
N
following has occurred:
G
• The valve unit was replaced or altered after purchase.
L
• An anti-siphon device was installed.
I
• The valve unit was removed from the cylinder for any reason.
S
• Any modification was done to the refillable air or CO
H
If any of these conditions has occurred, take your air or CO
Airsmith for inspection or contact the cylinder manufacturer.

Air Supply Cylinder Safety Tips

SAFETY TIPS to ensure that your air or CO
• Improper use, filling, storage, or disposal of air or CO
property damage, serious personal injury or death.
• Make sure that any maintenance or modification to any air or CO
by a qualified professional, such as a "C5" certified airsmith.
• The use of anti-siphon devices is not recommended. However, if one is already
installed on your air or CO
checked by, or the device installed by, a qualified professional.
• All air or CO
• Cylinder valves must be installed only by properly trained personnel.
• Do not overfill!! Never exceed the air or CO
• Do not expose pressurized air or CO
degrees Fahrenheit (55 degrees Celsius).
• Do not use caustic cleaners or strippers on the air or CO
and do not expose to corrosive materials.
• Do not modify the air or CO
cylinder valve from the air or CO
• Any air or CO
of 250 degrees Fahrenheit (121 degrees Celsius) or more must be destroyed by
properly trained personnel.
• Use appropriate gas for your cylinder. Only use CO
compressed air in a compressed air cylinder.
• Keep all cylinders out of the reach of children.
• The Air or CO
every 5 years by a DOT licensed agency.
• Keep exposed skin away from escaping gas when installing or removing air supply,
or if the marker or air supply is leaking. Compressed air and CO
cold, and can cause frostbite under certain conditions.
NOTE: Locate a "C5" certified airsmith at www.paintball-pti.com/search.asp
cylinder or is desired, it is critical that your cylinder be
2
cylinders must be filled only by properly trained personnel.
2
cylinder in any way. Never try to disassemble the
2
2
cylinder that has been exposed to fire or heated to a temperature
2
cylinder should be inspected and hydrostatically retested at least
2
cylinder, you are at risk if any of the
2
cylinder.
2
cylinder to a "C5" Certified
2
cylinder is safe for play:
2
2
cylinder's capacity.
2
cylinder to temperatures exceeding 130
2
cylinder.
in a CO
2
10
cylinder may result in
cylinder is done
2
cylinder or cylinder valve
2
cylinder and only use
2
gasses are very
2