Fortinet 548B Administration Manual page 868

Non-Configurable Data
Interface - Specifies the interface whose settings are displayed in the current table row.
Routing Mode - Specifies routing mode of an interface.
Admin Mode - Specifies administrative mode of an interface.
Implicit Mode - When ipv6 implicit mode is enabled, interface is capable of ipv6 operation without a
global address. In this case, an eui-64 based link-local address is used. This selector lists the two
options for ipv6 mode: enable and disable. Default value is disable.
Operational Mode - Specifies operational mode of an interface.
IPv6 Prefix/PrefixLength - Specifies configured IPv6 addresses on an interface.
State - Specifies whether an interface is active or not.
Command Buttons
Refresh - Refreshes the screen with most recent data.
11.6.4 Viewing IPv6 Interface Statistics Page
- 868 -