System Utilities - Fortinet 548B Administration Manual

Command Mode
Interface Config
7.16.2.3 macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address of
<macaddr> and <vlanid>. You must specify the <macaddr> parameter as a 6-byte hexadecimal number
in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must identify a valid VLAN.
Syntax
macfilter addsrc all <macaddr> <1-3965>
no macfilter addsrc all <macaddr> <1-3965>
<macaddr> - Specified a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
no - This command removes all interfaces to the source filter set for the MAC filter with the MAC
address of <macaddr> and VLAN of <vlanid>.
Default Setting
None
Command Mode
Global Config
7.17

System Utilities

7.17.1 clear
7.17.1.1 clear arp
This command causes all ARP entries of type dynamic to be removed from the ARP cache.
Syntax
clear arp
Default Setting
None
Command Mode
- 319 -