Fortinet 548B Administration Manual page 485

Interface: Valid slot and port number separated by forward slashes.
VRID: Represents the router ID of the virtual router.
IP Address: Is the IP Address that was configured on the virtual router
Mode: Represents whether the virtual router is enabled or disabled.
State: Represents the state (Master/backup) of the virtual router.
8.8.1.3 show ip vrrp interface
This command displays all configuration information of a virtual router configured on a specific interface.
Note that the information will be displayed only when the IP address of the specific interface is
configured.
Syntax
show ip vrrp interface <slot/port> [ <vrid>]
<slot/port> - Valid slot and port number separated by forward slashes.
<vrid> - Virtual router ID.
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
VRID: Represents the router ID of the virtual router.
Primary IP Address: This field represents the configured IP Address for the Virtual router.
VMAC address: Represents the VMAC address of the specified router.
Authentication type: Represents the authentication type for the specific virtual router.
Priority: Represents the priority value for the specific virtual router.
Advertisement interval: Represents the advertisement interval for the specific virtual router.
Pre-Empt Mode: Is the preemption mode configured on the specified virtual router.
Administrative Mode: Represents the status (Enable or Disable) of the specific router.
State: Represents the state (Master/backup) of the specific virtual router
8.8.1.4 show ip vrrp interface stats
This command displays the statistical information about each virtual router configured on the switch.
- 485 -