Management Commands - Fortinet 548B Administration Manual

Syntax
congestion-notify no-generate
no congestion-notify no-generate
no - This command uses to keep generate CNM.
Default Setting
keep generate CNM.
Command Mode
Global Config
7.3

Management Commands

7.3.1 Network Commands
7.3.1.1 show ip interface
This command displays configuration settings associated with the switch's network interface. The
network interface is the logical interface used for in-band connectivity with the switch via any of the
switch's front panel ports. The configuration parameters associated with the switch's network interface
do not affect the configuration of the front panel ports through which traffic is switched or routed.
Syntax
show ip interface
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Message
IP Address: The IP address of the interface. The factory default value is 0.0.0.0
Subnet Mask: The IP subnet mask for this interface. The factory default value is 0.0.0.0
Default Gateway: The default gateway for this IP interface. The factory default value is 0.0.0.0
Burned In MAC Address: The burned in MAC address used for in-band connectivity.
- 152 -