Fortinet 548B Administration Manual page 311

MD5 digest: Displays the checksum values for the VTP domain status.
Configuration last modified: Displays the time stamp of the last configuration modification and the
IP address of the switch that caused the configuration change to the database.
Local updater ID: Displays the Local updater ID for the VTP domain status.
7.14.1.4 show vtp trunkport
This command displays the VTP trunkport status.
Syntax
show vtp trunkport
Default Setting
None
Command Mode
Privileged Exec
Display Message
Port: Displays the interface number.
Trunkport: Displays the trukport status (enable or disable) on the interface number.
7.14.2 Configuration Commands
7.14.2.1 vtp
This command uses to configure global VTP administrative mode.
Syntax
vtp
no vtp
no - This command disables global VTP administrative mode.
Default Setting
Disabled
Command Mode
Global Config
- 311 -