Table of Contents
Advertisement
no - This command deletes an administrative scope multicast boundary specified by <groupipaddr>
and <mask> for which this multicast administrative boundary is applicable. <groupipaddr> is a group
IP address and <mask> is a group IP mask.
Default Setting
None
Command Mode
Interface Config
9.4.2.3
ip multicast ttl-threshold
This command applies the given <ttlthreshold> to a routing interface. The <ttlthreshold> is the
TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from the
interface. The value for <ttlthreshold> has range from 0 to 255.
Syntax
ip multicast ttl-threshold <0 - 255>
no ip multicast ttl-threshold
<0 - 255> - the TTL threshold.
no - This command applies the default <ttlthreshold> to a routing interface. The <ttlthreshold> is the
TTL threshold which is to be applied to the multicast Data packets which are to be forwarded from
the interface.
Default Setting
1
Command Mode
Interface Config
9.5
Protocol Independent Multicast – Dense Mode (PIM-DM) Commands
9.5.1
Show Commands
9.5.1.1
show ip pimdm
This command displays the system-wide information for PIM-DM.
- 519 -
Advertisement
Table of Contents
