2.
Product Overview
2.1
Switch Description
FortiSwitch-548B is a SFP+ 10-Gigabit Ethernet backbone switch designed for adaptability and
scalability. The Switch provides a management platform and uplink to backbone. Alternatively, the
Switch can utilize up to 48 10-Gigabit Ethernet ports to function as a central distribution hub for other
switches, switch groups, or routers. The built-in 1000/100/10 Ethernet port is for out of service. The
FortiSwitch-548B power system provides two power supplies. The FortiSwitch-548B SFP+ port also
provides 1-Gigabit speed by manual settings.
2.2
Features
•
Supports 48 SFP+ 10-Gigabit Ethernet ports
•
1 built-in 1000/100/10 Ethernet port for out of band switch mangement.
•
Support two power supplies -- Software will detect power failure and read information(what power
install on your system)
•
IEEE 802.3z and IEEE 802.3x compliant Flow Control for all 10-Gigabit ports
•
Supports 802.1D STP, 802.1S MSTP, and 802.1w Rapid Spanning Tree for redundant back up
bridge paths
•
Supports 802.1Q VLAN, Protocol-based VLAN, Subnet-based VLAN, MAC-based VLAN, Protected
Port, Double VLAN, Voice VLAN, GVRP, GMRP, IGMP snooping, 802.1p Priority Queues, Port
Channel, port mirroring
•
Supports VTP (VLAN Trunking Protocol)
•
Supports CDP
•
Supports LLDP with potential communication problems detection
•
Supports Port Security
•
Multi-layer Access Control (based on MAC address, IP address, VLAN, Protocol, 802.1p, DSCP)
•
Quality of Service (QoS) customized control
•
802.1x (port-based) access control and RADIUS Client support
•
TACACS+ support
•
Administrator-definable port security
•
Supports DHCP Snooping, Dynamic ARP Inspection and IP Source Guard (IPSG)
•
ARP support
•
IP Routing support
•
OSPF v2 and v3 support
•
RIP v1/v2 and RIPng support
•
Router Discovery Protocol support
•
Virtual Router Redundancy Protocol (VRRP) support
- 8 -