Fortinet 548B Administration Manual page 115

Syntax
ipv6 mld snooping querier vlan election participate <1-3965>
no ipv6 mld snooping querier vlan election participate <1-3965>
Default Setting
Disabled
Command Mode
Global Config
7.2.10 Port Channel
7.2.10.1 show port-channel
This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Syntax
show port-channel brief
Default Setting
None
Command Mode
Privileged Exec
Display Message
For each port-channel the following information is displayed:
Logical Interface: The field displays logical slot and the logical port.
Port-Channel Name: This field displays the name of the port-channel.
Link State: This field indicates whether the link is up or down.
Trap Flag: This object determines whether or not to send a trap when link status changes. The
factory default is enabled.
Type: This field displays the status designating whether a particular port-channel (LAG) is statically
or dynamically maintained. The possible values of this field are Static, indicating that the
port-channel is statically maintained; and Dynamic, indicating that the port-channel is dynamically
maintained.
Mbr Ports: This field lists the ports that are members of this port-channel, in slot/port notation.
Active Ports: This field lists the ports that are actively participating in this port-channel.
This command displays an overview of a specificed port-channel (LAG) on the switch.
- 115 -