Fortinet 548B Administration Manual page 722

Switch GMRP - Indicates whether the GARP Multicast Registration Protocol administrative mode for
this switch, enabled or disabled. The factory default is disabled.
Slot/Port - Slot/Port of the interface.
Port GVRP Mode - Indicates whether the GVRP administrative mode for the port is enabled or
disabled. The factory default is disabled.
Port GMRP Mode - Indicates whether the GMRP administrative mode for the port is enabled or
disabled. The factory default is disabled.
Join Time (centiseconds) - Specifies the time between the transmission of GARP PDUs registering
(or re-registering) membership for a VLAN or multicast group in centiseconds. An instance of this
timer exists for each GARP participant for each port. Permissible values are 10 to 100 centiseconds
(0.1 to 1.0 seconds). The factory default is 20 centiseconds (0.2 seconds).
Leave Time (centiseconds) - Specifies the time to wait after receiving an unregister request for a
VLAN or multicast group before deleting the associated entry, in centiseconds. This allows time for
another station to assert registration for the same attribute in order to maintain uninterrupted service.
An instance of this timer exists for each GARP participant for each port. Permissible values are 20 to
600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6 seconds).
Leave All Time (centiseconds) -This Leave All Time controls how frequently LeaveAll PDUs are
generated. A LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants
will need to rejoin in order to maintain registration. An instance of this timer exists for each GARP
participant for each port. The Leave All Period Timer is set to a random value in the range of
LeaveAllTime to 1.5*LeaveAllTime. Permissible values are 200 to 6000 centiseconds (2 to 60
seconds). The factory default is 1000 centiseconds (10 seconds).
11.3.12.2 Configuring the whole Switch GARP Configuration Page
It can take up to 10 seconds for GARP configuration changes to take effect.
!
Selection Criteria
GVRP Mode - Choose the GARP VLAN Registration Protocol administrative mode for the switch by
selecting enable or disable from the pull down menu. The factory default is disabled.
GMRP Mode - Choose the GARP Multicast Registration Protocol administrative mode for the switch
by selecting enable or disable from the pull down menu. The factory default is disabled.
Command Buttons
- 722 -