Hardware Installation
Speaker
Keylock & Power LED
Some housings have a five-pin connector
for the keylock and power LED.
Reset
Break Switch
Green Mode LED
( Turbo Switch )
( Turbo LED )
Ground
Other housings may have a 12-pin
Reset
Keylock
connector. If your housing has this type
Res-VCC
Ground
of connector, plug it onto CN16 as
Speaker
shown in the following figure. Make
sure that the red wire of the connector
connects to pin 11.
Break Switch
VCC
( Turbo Switch )
Ground
2.9.8 Keyboard
The onboard keyboard connector is a
five-pin AT-compatible connector
marked CN2. Refer to the figure on how
to connect an AT keyboard.
The PS/2 keyboard connector is optional.
2-19