Table of Contents
Advertisement
AMI BIOS Utility
Quick Boot
During boot-up, the system performs power-on self test (POST) routines.
Enable the parameter if you want to skip some POST routines during the boot
process. Set this to
routines and follow the specified boot-up sequence.
Power-on Delay
This parameter lets you set the POST waiting time for the HDD motor to
stabilize before boot up. The settings are from
Disabled.
The default setting is
3-8
Do not change the settings of the Advanced Setup
parameters if you are not a qualified technician.
Doing so may cause fatal system failure.
Disabled
to let the system perform all the POST
Disabled.
1
to
15 seconds
and
Hide quick links:
Advertisement
Table of Contents
