INTD, Hardwired
Auto
set to
, this parameter becomes nonconfigurable.
PCI IDE Secondary IRQ
This parameter lets you assign an IRQ for the IDE device connected to your
secondary IDE connector. The settings are
INTD, Hardwired
set to
Auto
, this parameter becomes nonconfigurable.
PCI Slot 1/2/3/4 IRQ Priority
These parameters let you specify the appropriate interrupt for each occupied
PCI slots.
DMA Channels 0, 1, 3, 5, 6, 7
These lines allow you to assign the available DMA channels to either PnP or
ISA functions.
IRQs 3, 4, 5, 7, 9, 10, 11, 14, 15
These lines allow you to assign the available IRQs to either PCI/PnP or ISA
devices.
Reserved for Memory Size
This option lets you specify the memory area reserved for PCI devices.
Reserved Memory Address
This option lets you specify the memory address of the specified memory area
reserved for PCI devices.
and
Disabled
. If the PCI IDE Card parameter is
INTA, INTB, INTC,
and
Disabled
. If the PCI IDE Card parameter is
AMI BIOS Utility
3-21