AOpen AP53 User Manual page 46

AMI BIOS Utility
System Keyboard
Set this parameter to
system. Otherwise, select
Primary Display
This function detects the type of VGA in use. The selections are
CGA 40 x 25, CGA 80 x 25, Mono,
VGA/EGA
default setting is
Password Check
This parameter allows you to use the password feature. When set to
Always , a user-password prompt appears every time you turn on the
computer. When set to
enter setup. The optimal and fail-safe default setting is
Parity Check
Set this parameter to
system. Otherwise, set this parameter to
still operate without using the parity scheme for SIMMs with parity, this
function is normally set to
OS/2 Compatible Mode
Enable the parameter if you have an OS/2 operating system installed in your
system. Otherwise, set this to
Disabled .
Internal Cache
This function lets you enable or disable the internal cache.
External Cache
This function lets you enable or disable the external cache.
3-10
Present
if there is a keyboard connected to the
Absent
.
.
Setup , the password prompt appears when you try to
Enabled if you install SIMMs with parity in your
Disabled
.
Disabled
Absent
and
Setup
Disabled
. Since the DRAM can
. The default setting is
VGA/EGA,
. The
.