Peripheral Setup - AOpen AP53 User Manual

AMI BIOS Utility

3.2.6 Peripheral Setup

Select Peripheral
Onboard FDC
This parameter enables or disables the floppy drive controller.
Onboard Serial Port 1
This parameter allows you to select the address for the first serial port.
Selecting Disabled
Onboard Serial Port 2
This parameter allows you to select the address for the second serial port.
Selecting Disabled
This parameter is configurable only if the Onboard Serial Port 2 parameter is
enabled. This allows you to specify the serial port 2 mode.
3-22
from the Setup menu and the following screen appears.
deactivates the port.
deactivates the port.
SERIAL PORT 2 MODE