AOpen AP53 User Manual page 39

AMI BIOS Utility
You can input configuration values such as date, time and disk types in this
menu.
PRIMARY MASTER AND SLAVE/
SECONDARY MASTER AND SLAVE
These parameters allow you to configure the hard disks and the IDE devices
connected to your IDE connectors. To configure the hard disk connected to
the master port of the primary IDE connector, select Primary Master
e
and press . The following screen appears:
To configure the hard disk connected to the slave port of the primary IDE
Primary Slave
connector, select .
The secondary IDE connector also supports two IDE devices. To configure
the hard disk or the IDE device connected to the master port, select
Secondary Master . Choose Secondary Slave to configure the
device connected to the slave port.
The following are the parameters that you need to set to configure your hard
disks or the IDE devices:
Type
This parameter lets you set the IDE device type that your system supports.
The options are User , Auto , CD-ROM , Type 1-46 , and Not
3-3