Table of Contents
Advertisement
Hardware Installation
2.9.5 Printer
Plug in the printer bracket connector
onto the onboard parallel connector
marked CN9 on the board. Refer to the
figure.
The printer port on the bracket accepts
the printer cable.
2.9.6
IDE Devices
Primary IDE Connector
The primary IDE connector marked
CN10 on the system board supports
HDD 1
two IDE devices - one IDE hard disk
and one additional IDE device.
Connect your IDE HDD into the
master port of the primary IDE cable.
Plug in the slave port into another IDE
device, if any.
HDD 2
2-17
Hide quick links:
Advertisement
Table of Contents
