Serial Devices (Com1/Com2); Floppy Drives - AOpen AP53 User Manual

Hardware Installation
Serial Mouse
To connect a serial mouse, plug in the serial bracket connectors onto the CN6
and CN7. Insert the serial mouse connector into the appropriate COM port on
the bracket. See section 2.9.3.

2.9.3 Serial Devices (COM1/COM2)

To support serial devices, insert the
serial device connector into the serial
port on the bracket. Plug in the serial
port bracket connectors onto the
appropriate onboard connectors. The
COM1 connector is marked CN7 and the
COM2 connector is marked CN6 on the
system board.

2.9.4 Floppy Drives

Connect the floppy drive cable onto the
floppy drive connector marked CN8 on
the system board. See section 1.1 for the
location of the connector. Refer to the
figure on how to connect the cables.
2-16