AOpen AP53 User Manual page 45

Boot-up Sequence
The boot-up sequence allows you to specify the system search sequence. The
selections are C:, A:, CD-ROM / A:, CD-ROM, C: / A:,
C:, CD-ROM / C:, CD-ROM, A: / CD-ROM, A:, C:
CD-ROM, C:, A:.
set the CD-ROM as the first priority. The default is
Boot-up Numlock
Setting this parameter to
keypad. Set this parameter to
numeric function allows you to use the cursor control numeric keypad. The
On
default setting is
Floppy Drive Swap
This parameter allows you to swap floppy drives. For example, if you have
two floppy drives (A and B), you can assign the first drive as drive B and the
second drive as drive A or vice-versa. Disable the parameter to bypass the
function. The default is
Floppy Drive Seek
When enabled, the BIOS detects whether there is a floppy disk drive installed
in the system. Disable the parameter to skip the function.
PS/2 Mouse
Setting this parameter to
and assign IRQ12 for the said function. Set this to
function and to reserve IRQ12 for other functions.
Typematic Rate
This parameter determines the typematic rate. Select
typematic rate. Select
If you have a bootable CD-ROM installed, you may
On enables the numeric function of the numeric
Off
to disregard the function. Disabling the
.
Disabled
.
Enabled lets you enable the PS/2 mouse function
Slow to decrease it.
AMI BIOS Utility
A:, C:, CD-ROM.
Disabled
to bypass the
Fast to increase the
and
3-9