Install The Hard Disk Cable And Power Cord; Install The Optical Driver Cable And Power Cord - AOpen XC Cube Mini Manual

2.14 Install the Hard Disk cable and power cord

1 As shown in the right picture, it s a vertical
view of the XC Cube Mini, the cable
connector of the HDD place to the left side
of the case, connect with the cable and
power cord. If the position is not correct,
you won t set up the cable and power
cord.

2.15 Install the Optical driver cable and power cord

As shown in the picture, take the power cord link to the power hander of the adaptor,
1
then link to the ODD cable. Please pay attention to the red cable should connect with
the pin 1 of the connector.
25