AOpen XC Cube Installation Manual

MZ855-II_915-M-EG-E0509B.pdf MZ855-II_915-M-EG-E0509B.pdf 2005/9/15 2005/9/15 上午 11:01:04 上午 11:01:04
MZ855-II / MZ915-M MZ855-II / MZ915-M MZ855-II / MZ915-M
Optical Device
/ Slim Device Bay
C
M
Y
S/PDIF OUT Port
CM
Earphone Jack USB 2.0 Ports
MY
Microphone Jack
CY
CMY
MZ855-II
K
PS/2 Mouse Connector
PS/2 Keyboard Connector
Monitor Connector
Coaxial Out RCA Port
Microphone
IEEE1394 Port
Jack (C/B)
(6 pin)
Ethernet Network
Line-Out Jack (L/R)
Connector (RJ45)
S/PDIF IN Port
Line-In Jack (SUR)
USB 2.0 Ports
Easy Installation Guide
Power Button
HDD Indicator
IEEE1394 Port
(6 pin)
IEEE1394 Port (4 pin)
MZ915-M
Center/Sub-woofer
D4 TV-Out
(Optional)
Surround L/R
COM1 Port
SIDE L/R
USB 2.0 Ports Microphone
Jack
Ethernet Network
Line-Out Jack (L/R)
Connector (RJ45)
IEEE1394 Port Line-In Jack
TV OUT
(6 pin) SPDIF-IN
Y/Pb/Pr
S-Video
Composite
Plug the RJ45 cable into the
1 Connect the purple keyboard 2 Connect the monitor's video 3
connect or to the matching purple cable to the blue monitor network jack (recognizable
connect or at the rear panel. Also connect or located at the by an icon with three tiny
connect the green mouse rear panel. computers). [ Depending on
connect or tothe green connector models. ]
at the rear panel.
5 Connect the microphone cable 6 Depending on the type of 7 Connect the power cord to
to the pink microphone jack at printer that you have,connect
the system's power connector
the rear panel. [ Depending on the printer's data cable to the as shown.
models. ] blue-colored parallel port as
shown in the picture.
MZ855-II Series
MZ915-M Series
Back Panel TV OUT (S-Video)
AUX_IN
Y/Pb/Pr Composite
Front Audio JP28 KB/MS
Wake_up Jumper
AC'97 CODEC SPDIF OUT
FDD Connector
JP4 & JP5 D4 OUT
Printer Connector
AUX_IN Jumper
COAXIAL OUT
4-pin ATX Power
CD_IN
IEEE 1394 x 2
Front Audio
PCI slot USB 2.0 x 4
7.1 Channel CODEC
479-pin CPU Socket
CD_IN
supports Intel®
AGP 4X
Pentium® M and PCI slot
Celeron® M CPU
PCI express X 16
FSB 533 Enable Jumper
Intel 855GME +
Switch to pin 1 & 2 for 400MHz*
Switch to pin 2 & 3 for 533MHz ICH4-M Chipset
*default
USB 2.0
CPUFAN1
IDE Connector x 2
IDE Connector x 1
(ATA33/ 66/100)
(ATA33/ 66/100)
DDR333/266/200
DIMMx 2
JP14 CMOS Jumper
Max. 2 GB
Serial ATA X 4
Front Panel
Connector ATX Power
Front Panel
Connector
Socket 479 CPU Frequency Table Socket 479 CPU Frequency Table
Vender Processor FSB Multiplier Vender Processor
Intel
Intel Pentium M 770 ( 2.13 GHz-Dothan ) 533 MHz 16 x Pentium M 770 ( 2.13 GHz-Dothan )
Intel
Intel Pentium M 760 ( 2.00 GHz-Dothan ) 533 MHz 15 x Pentium M 760 ( 2.00 GHz-Dothan )
Intel
Intel Pentium M 750 ( 1.86 GHz-Dothan ) 533 MHz 14 x Pentium M 750 ( 1.86 GHz-Dothan )
Intel 533 MHz 13 x Intel
Pentium M 740 ( 1.73 GHz-Dothan ) Pentium M 740 ( 1.73 GHz-Dothan )
Intel 533 MHz 12 x Intel
Pentium M 730 ( 1.60 GHz-Dothan ) Pentium M 730 ( 1.60 GHz-Dothan )
Intel 400 MHz 20 x Note: With CPU changing rapidly, there might be fastest CPU on the
Pentium M 755 ( 2.0 GHz-Dothan )
market by the you received this installation guide. This table is kindly for
Intel 400 MHz 18 x your references only.
Pentium M 745 ( 1.8 GHz-Dothan )
Intel 400 MHz 17 x
Pentium M 735 ( 1.7GHz-Dothan ) HDTV Selection Jumper Setting
Intel 400 MHz 16 x
Pentium M 725 ( 1.6GHz-Dothan )
The HDTV output interface connector on
Intel 400 MHz 15 x JP29 JP30
Pentium M 715 ( 1.5GHz-Dothan ) the back panel of the system is enabled by
HDTV ON ON
applying shorting caps to JP29, JP30 as
Intel 400 MHz 17 x PCIE CARD OFF OFF
Pentium M 1.7GHz ( Banias ) shown in the illustrtion.
Intel 400 MHz 15 x If the user intends to use the HDTV video output from an add-on VGA card, s/he
Pentium M 1.5GHz ( Banias )
needs to take out all the shorting caps of JP29, JP30. Please save the shorting
Intel 400 MHz 14 x
Celeron M 360 ( 1.4GHz-Dothan ) caps in a safe place in case the user intends to use the on-board HDTV
connector.
Intel 400 MHz 13 x
Celeron M 350 ( 1.3GHz-Dothan )
Intel 400 MHz 15 x
Celeron M 340 ( 1.5GHz-Banias )
Note: With CPU changing rapidly, there might be fastest CPU on the
market by the you received this installation guide. This table is kindly for
your references only.
To learn more about AOpen XC Cube, visit us at http://xc.aopen.com.tw, http://www.aopen.com
P/N:49.MZ102.0A2 Doc.No:MZ855-II_915-M-EG-E0509B
Connect the speakers' audio cable
4
to the light green speaker jack at the
rear panel. Also insert the speakers'
power plug into a properly grounded
AC wall socket. [ Depending on
models. ]
8 Connect the other end of the
power cord to the AC wall
socket, and press the power
button to boot up your system.
Back Panel
JP28 KB/MS
Wake_up Jumper
Printer Connector
FDD Connector
4-pin ATX Power
CPUFAN1
IEEE 1394 x 2
USB 2.0 x 4
479-pin CPU Socket
supports Intel®
Pentium® M and
Celeron® M CPU
Intel 915G +
ICH6 Chipset
SYSFAN
DDR2 400/533
Max. 2 GB
EPS ATX Power
FSB Multiplier
533 MHz 16 x
533 MHz 15 x
533 MHz 14 x
533 MHz 13 x
533 MHz 12 x