Table of Contents
Advertisement
1.3 Preliminary Tools
"A workman must first sharpen his tools if he is to do his work well". Right before you start the
assembly, there are some tools that can't be spared.
Firstly, the most frequently-used tool is cross screwdriver by which most interior components
are fixed. A suitable screwdriver can make the following job much easier. Being so, does any
screwdriver apply? Actually a magnetic tip one is suggested. That is because in the process
of setting up your PC, the situation is very likely to happen: you accidentally drop the screws
into the interior of the computer. In case of this, a magnetic screwdriver helps attracting the
fallen screws that are hard to reach by hands. Some screw holes are placed where hands can
hardly reach. At this time, we need a magnetic screwdriver, too. In addition, the size of our
tool also matters. Generally, the domestic 107 cross screwdriver is the most appropriate one.
Besides, a flat screwdriver is also essential for installing CPU on socket 479.
When putting things together, it is necessary to adjust Jumper. In most cases, things can be
done barehanded. But there comes a time always when your hands fail to reach in and fix
the problem. You'll thank God with a pliers on hand which keeps you away from any annoying
trouble for just setting one JUMPER.
6
What is Jumper?
Jumper is something generally
referred to " Jumping wire" that utilizes the
short circuit of the pins to tune up some
functions, such as FSB (front side bus),
ratio, and sound switches adjusting.
Advertisement
Table of Contents
