Disassemble The Power Modulus - AOpen XC Cube Mini Manual

2.3 Disassemble the power modulus

The first turn the screw off from the center of the power modulus in the case. Pull
1
away the fixed clamp beside the modulus gently, then raise it about 30 degree. Finally
take it out from the top of the case.
There are many connectors link with the motherboard in the power modulus of the XC
2
Cube Mini. To avoid the breakdown, please don t disassemble the wire in the power
modulus. Put the wire on the left side in the case, then start to install.
15