2.9 Install the Hard Disk cable to the motherboard
For the XC Cube Mini special design, before
you install the driver bays, you can connect
the HDD driver bay cable and IDE hander
of the Motherboard. You can refer to the
Easy Installation Guide to understand the
position. Please pay attention to the red
cable should aline with the pin 1 of the
connector.
2.10 Install the Optical driver cable to the motherboard
For the XC Cube Mini special design, before
you install the driver bays, you can connect
the ODD driver bay cable and IDE hander
of the Motherboard. You can refer to your
Easy Installation Guide to understand
the position. Please pay attention to the
red cable should aline with the pin 1 of the
connector.
22