Table of Contents
Advertisement
Appendix
Install OS into Serial ATA Hard Disk for UX661 Series
UX661 is equipped with powerful SiS 964 chip with Serial ATA function. Please notice
that when installing OS into Serial ATA hard disk, there will be some limitations due to the
limitation of SiS 964 chip. Please carefully follow the installation guides below to install
Windows 2000/XP or Windows 98SE/ME.
1.
Power on and then press <Delete> to enter BIOS during POST (Power On Self Test).
2.
Select Integrated Peripherals > SIS OnChip PCI Device > SiS Serial ATA Mode.
3.
For installing Windows 2000/XP, please select "IDE" mode; Floppy drive is not
necessary.
4.
For installing Windows 98SE/ME, please select "RAID" mode; Floppy Drive is not
necessary, but make sure FDD is disabled in BIOS or FDD is correctly connected to
motherboard.
5.
Finally, press <F10> to save the setting and exit BIOS setup.
37
Advertisement
Table of Contents
