Install Hard Disk - AOpen XC Cube TZ915 User Manual

2.3 Install Hard disk

1
Before taking the Hard disk bay out from the left side of the motherboard, please take
the screws off that is below the Drives Cage.
2
It takes the Hard disk bay out along the curve slideway.
3
Put the Hard disk into the Hard disk
bay, please pay attention to the yellow
arrowhead as shown, and take the
PCB (Printed Circuit Board) of the
Hard disk toward up. The purpose
of the purple mark is to remind you
put the connecter of the Hard disk
toward outside. That will be the same
direction with the screw.
TZ65II_915-OL-E0501A[49.BZ101.0A1].indd 13
13
2005/2/17, 下午 10:32