Table of Contents
Advertisement
2.5 Install the HDD driver bay
As shown in the picture, take the faceplate of the HDD driver bay to face up, then
1
push to the below space of the driver bay.
Take the screw no.2 from the XC Cube package to screw to the four screw hole.
2
Please pay attention, don t break the rubber cushion. This is the special design from
the AOpen, when you use the XC Cube Mini, you will always work quietly.
Pay attention to the red
line as shown, it means the
red line side must be face
to the front XC Cube. The
correct installation as shown, for linking
the cable easily, the cable of the HDD
driver bay must be located at left side
of the driver bay.
17
Advertisement
Table of Contents
