2.16 Install the power modulus
Take the power modulus about 30 degree angles, let rear rib aline the slot of the rear
1
XC Cube Mini, press downward gently and screw it tightly. Finally it will set up the
power modulus.
2.17 Install the front panel
If you want to install the slim ODD, please follow the below steps.
There are four ribs inside the front panel of the XC Cube Mini. After loose the ribs,
1
push the front panel outside to the inside, then slide the front ODD off. It should aline
the hole of the front case. Take the front panel from bottom to top and combine with
the XC cube Mini.
26