Altigen MaxCommunicator Manual page 67

4. If you want, check the Verify Caller ID based on the following check
box and then specify the incoming phone numbers for ONA. If ONA
finds one of these numbers on an incoming call, it will forward the call
to you.
You can enter up to 10 phone numbers in the Caller ID Verification
fields. For local numbers, use 7 digits (5555555). For long distance
numbers, use 10 digits—area code + local number.
Note: If you enter no numbers in the Caller ID Verification fields and
ONA is enabled, ONA is made available to every caller.
Using a Password
You can use a Caller ID Verification field to enter a password number
such as "5555" so that a caller who knows this password can use
ONA to find you, regardless of where they are calling from. Tell the
caller to dial 1 during your personal greeting and then enter the pass-
word.
5. Enter the Forwarding Numbers to be used by the system to find you
when ONA is active. You can set up to four different numbers—
extensions or outside numbers. For outside numbers, use the
drop-down list to select the trunk access code you want to use. Specify
whether the number is an extension or outside number and if a
password is required.
When ONA is active, the system dials the forwarding number(s) in
the order from Forwarding Number 1 through Forwarding Number 4.
Note that this number order does not correspond to the Schedule
order—for example, Forwarding Number 2 is not used first during
Schedule Number 2.
Note: If your system administrator has not configured your extension to
require you to enter your extension password when answering an
ONA call, then a call forwarded via ONA that is picked up by a
voice mail box, fax machine, or answering machine will connect,
and will not try any subsequent Forwarding Numbers. Therefore,
if you want ONA to use such an option as a last resort, it should be
Forwarding Number 4.
You can set the ONA ring duration from 5 to 45 seconds using the Ring
drop-down lists. Default value is 20 seconds. The system will ring the ONA
target during the specified time limit. If the ring time exceeds 30 seconds,
the system will play a phrase every 15 seconds (playing time is included in
ring time).
MaxCommunicator Manual 59