Version Mismatch Dialog Box; Logging In Remotely - Altigen MaxCommunicator Manual

(Subsequently, when you log in, you'll see the IP address in the Server
Name field. You may use the drop-down list to select a different
server, if more than one server is available.)
2. Enter your Extension number and Password assigned to your phone.
(You can also log in as a workgroup or a huntgroup.)
If you want to store your login password and have it entered
automatically the next time you log in to MaxCommunicator, check
the Always save password check box.
Note: Up to eight unsuccessful login attempts are allowed, after
which login will be disabled for from 1 to 24 hours (depending
on the duration set by your system administrator).
3. If your extension is an IP extension and you will be using a headset,
check the Enable IPTalk softphone option. (An AltiGen IPTalk
license must be assigned to your extension.)
(Even if you do not have an IP phone, as long as your extension is set
up as an IP extension by your system administrator, you can check the
Enable IPTalk softphone check box.)
See "Logging In Remotely" on page 10 for more information on using
IP extensions remotely.
4. Click Sign In or press the Enter key. To back out of signing in, click
Cancel or press the Esc key.

Version Mismatch Dialog Box

If your version of MaxCommunicator doesn't match the version of MAX
Communication Server on the system server, you are prompted for upgrade
permission when you try to log in. If you allow upgrade at this time, the
MaxCommunicator startup is terminated and a software upgrade session is
started. Restart MaxCommunicator to run the newer version. (See
"Automatic Upgrade" on page 6 for more details.)

Logging In Remotely

You can use MaxCommunicator from a remote location if
• MaxCommunicator is installed on your remote computer
• Your extension is configured as an IP or mobile extension by your
system administrator
10 MaxCommunicator Manual