Getting Started - Omega; Main Menu - Allied Telesis AT-4016TR Operation Manual

Getting Started
Getting Started — Omega

Main Menu

10
Your switch can operate either stand-alone when the backbone port is not
connected to an ATM network — or as an Ethernet switch/ATM Emulated
LAN when the backbone port is connected to an ATM network and
functioning.
To be an operational, stand-alone Ethernet switch, your switch does not
require management (ATI's Omega, for example) — or any other network
management application. Simply attach your devices to the RJ45 ports, apply
power and you have a working switch.
ATI's Omega management software is pre-installed and operational when
power is applied to the switch. Configuring Omega depends, however, upon
the requirements of your particular environment.
Omega management enables you to access and configure your ELANs and your
switch.
Omega's Main menu enables you to access the submenus that are needed to
configure your Ethernet and ATM network.
The following menus are used to either view ATM statistics or configure your
ELAN:
Cell statistics - This menu enables you to view ATM cell transmit and
receive statistics as well as Loss of Frame and Sync Events.
Virtual circuit information - This menu enables you to view active VCI
information and statistics. The VCI number, name and type are listed
in this menu. You can view specific VCI statistics in a submenu.
LAN emulation - The Lan emulation menu enables you to access four
ELAN configuration or definition submenus.