Product Description; Overview - Allied Telesis AT-4016TR Operation Manual

Ethernet switch with atm access
Hide thumbs Also See for AT-4016TR:
Table of Contents

Advertisement

Chapter 1

Product Description

Overview

Welcome to Allied Telesyn International!
Allied Telesyn's AT-4016TR Ethernet Switch With ATM Access , AT-4016F
Ethernet Switch With ATM Access and AT-TS95TR TurboStack Switch With
ATM Access and Management are all Ethernet-to-Ethernet and Ethernet-
to-ATM switches. All support 10 Mbps of dedicated bandwidth on 16
(AT-4016) or 8 (AT-TS95TR) IEEE 802.3 Ethernet ports. Further, all support
a 155 Mbps Asynchronous Transfer Mode (ATM) port for connectivity to an
ATM switch.
The release of system software Version 2.0 supports Ethernet and ATM
communication over Permanent Virtual Circuits (PVCs).
Your switch also provides an Emulated LAN (ELAN) capability by either
port or MAC address which, in turn, allows you to group all Ethernet ports —
as well as additional switches — as if you are in the same physical LAN.
As stated in the Preface, both switches are almost identical in form and
function. The differences are primarily physical. The following table, repeated
from the Preface, summarizes these differences.
AT-4016TR/AT-4016F
AT-S7 PCMCIA Firmware Card
16 10Base-T or Fiber Optic ports
No backplane
ATM media port is in back
Table 2: AT-S7/AT-S9 Differences
AT-S9 Flash EPROM Cassette
8 10Base-T ports
6-port segmented backplane
ATM media port is in front
AT-TS95TR
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

At-4016fAt-ts95trAt-s7At-s9

Table of Contents