Status Leds - Allied Telesis AT-FS201 Installation Manual

Description
Data packet forwarding and filtering at full wire speed (10 Mbps to
100 Mbps, 100 Mbps to 100 Mbps, and 10 Mbps to 10 Mbps)
Store and forward switching mode
Automatic address learning and aging
IEEE 802.3u compliant auto-negotiation
External AC/DC power adapters (North America, Continental Europe,
or United Kingdom)
For use on a desktop or in an AT-MCR12 chassis

Status LEDs

Table 2 defines the LEDs for the switches.
LED Color
PWR Green
LNK/ACT Green
Blinking
100M Green
OFF
FD/COL Green
OFF
Blinking
AUTO NEG Green
OFF
4
Table 2 Status LEDs
Description
Power is applied to the switch.
A valid link has been established on the port.
Data is being received or transmitted on the port.
The twisted pair port is operating at 100 Mbps.
The twisted pair port is operating at 10 Mbps.
The switch is operating in full-duplex mode.
The switch is operating in half-duplex mode.
A collision has been detected on the port.
Auto-negotiation on the twisted pair port is enabled.
Auto-negotiation on the twisted pair port is disabled.