Inspecting The Unit - Agilent Technologies Series N6700 User Manual

Items Supplied
Mainframe Items
Power Cord
Ferrite Core
Digital Connector plug
Product Reference CD-ROM
Automation-Ready CD-ROM
Quick Reference Guide
T-10 Torx tool
Power Module Items
8 A Output Connector plug
12 A Output Connector plug
20 A Output Connector plug
50 A Output Connector plug
AUX Measurement
connector plug
Small Sense Jumpers
Large Sense Jumpers
Sense Connector
Module Cal. Certificate

Inspecting the Unit

Series N6700 User's Guide
Description
A power cord suitable for your location.
Installs on power cord to reduce common mode currents.
8-pin connector for connecting signal lines to the digital port.
Includes drivers and documentation.
Contains Agilent IO Libraries Suite.
Contains quick reference information.
Torx tool for installing or removing power modules.
One 8 A, 8-pin connector plug for connecting power and sense
leads. Only used in N678xA SMU.
One 12 A, 4-pin connector plug for connecting power and
sense leads. Used in all except N6731B, N6741B, N6753A-
N6756A, N6763A-N6766A, N6773A, N678xA SMU.
One 20 A, 4-pin connector plug for connecting power and
sense leads. Only used in N6731B, N6741B, N6754A, N6756A,
N6764A, N6766A, N6773A.
One 50 A, 2-pin connector plug for connecting power leads.
Only used in N6753A, N6755A, N6763A, N6765A.
A 2-pin connector plug for connecting the auxiliary
measurement inputs. Only used in N6781A.
Two small jumpers for local sensing at the output connector.
Used in all except N6731B, N6741B, N6753A-N6756A,
N6763A-N6766A, N6773A, N678xA SMU.
Two large jumpers for local sensing at the output connector.
Only used in N6731B, N6741B, N6754A, N6756A, N6764A,
N6766A, N6773A.
A 4-pin connector for connecting sense leads. Wires (p/n
5185-8847) are used for local sensing. Only used in N6753A,
N6755A, N6763A, N6765A.
A certificate of calibration referenced to the serial number.
When you receive your power system, inspect it for any obvious
damage that may have occurred during shipment. If there is damage,
notify the shipping carrier and nearest Agilent Sales and Support
Office immediately. Refer to
Until you have checked out the power system, save the shipping
carton and packing materials in case the unit has to be returned.
Check the list under "Items Supplied" and verify that you have
received these items with your instrument. If anything is missing,
please contact your nearest Agilent Sales and Support Office.
Part Number
Call Agilent Sales & Support Office
Agilent 9170-2131
Agilent 1253-6408
Phoenix Contact MC 1,5/8-ST-3,5
Agilent 5969-2914
Agilent E2094N
Agilent 5969-2950
Agilent 8710-2416
Agilent 1253-6408
Phoenix Contact MC 1,5/8-ST-3,5
Agilent 1253-5826
Phoenix Contact MSTB 2,5/4-STF
Agilent 1253-6211
Phoenix Contact PC 4/4-ST-7,62
Agilent 1253-7187
Molex 39422-0002
Agilent 1253-8485
Phoenix Contact FMC 1,5/2-ST-3,5
Agilent 8120-8821
Phoenix Contact EPB 2-5(1733169)
Agilent 0360-2935
Phoenix Contact 3118151
Agilent 1253-5830
Phoenix Contact MC 1,5/4-ST-3,5
N/A
www.agilent.com/find/assist.
Installation 2
25