Front Panel Display - Agilent Technologies Series N6700 User Manual

4 Operating the Power System

Front Panel Display

98
Screen Saver
The power system has a front panel screen saver that significantly
increases the life of the LCD display by turning it off during periods
of inactivity. The delay can be set from 30 to 999 minutes in 1 minute
increments. As shipped from the factory, the screen saver comes on
one hour after activity on the front panel or interface has ceased.
When the screen saver is active, the front panel display turns off, and
the LED next to the Line switch changes from green to amber. To
restore the front panel display, simply press one of the front panel
keys. The first action of the key turns the display on. Subsequently,
the key will revert to its normal function.
If the Wake on I/O function is selected, the display is restored
whenever there is activity on the remote interface. This also resets
the timer on the screen saver. As shipped, Wake on I/O is active.
Front Panel:
Select System\Preferences\Display\Saver
Enable or disable the screen saver by checking
or unchecking the Screen Saver checkbox.
Then Press Select.
Enter a value in minutes in the Saver Delay
field to specify the time when the screen saver
will activate.
Check Wake on I/O to activate the display with
I/O bus activity.
Contrast
You can set the contrast of the front panel display to compensate for
ambient lighting conditions. The contrast can be set from 0% to 100%
in increments of 1%. As-shipped, the contrast is set to 50%.
Front Panel:
Select System\Preferences\Display\Contrast
Enter a contrast value in the Contrast box.
Then Press Select.
View
You can specify how the output channels are displayed at turn on.
Front Panel:
Select System\Preferences\Display\View
Check 1-channel to display channel one.
Check 4-channel to display all channels.
SCPI Command:
Not Available.
SCPI Command:
Not Available.
SCPI Command:
To display all channels:
DISP:VIEW METER4
Series N6700 User's Guide