Getting Started - Agilent Technologies Series N6700 User Manual

NOTE
Series N6700 User's Guide
3

Getting Started

Turning the Unit On .......................................................................................... 46
Selecting an Output Channel
Entering an Output Voltage Setting
Entering a Current Limit Setting
Enabling the Output .......................................................................................... 47
Using the Front Panel Menu
Connecting to the Interfaces
Communicating Over the LAN
Securing the Interfaces .................................................................................... 59
This chapter describes how to get started using your power system. It
discusses turning the unit on, using the front panel controls, and
navigating the front panel command menu. A map of the front panel
menu structure is found in Chapter 1.
This chapter also contains information on how to configure the three
remote interfaces that are provided on the back of the instrument.
Detailed information on configuring the remote interfaces is included in the
Agilent Technologies USB/LAN/GPIB Interfaces Connectivity Guide, which is
available on the Automation-Ready CD included with this product
.......................................................................... 46
............................................................... 46
..................................................................... 47
........................................................................... 48
.......................................................................... 50
........................................................................ 57
.
45