Agilent Technologies Series N6700 User Manual page 15

Menu Command
System IO
Groups
Preferences
Admin
About
Series N6700 User's Guide
LAN ActiveSettings
Config IP
Name
Domain
DNS
TCP
Reset
USB Status
Identification
GPIB
DigPort Pins<1> Function
Pins<2> Function
Pins<3> Function
Pins<4-7> Function
Pins<1-7> Polarity
Data
Display Contrast
Saver
View
Keys
Lock
Login/Logout
Cal Volt Vprog
Vlim
Vmeas
Curr Iprog
Ilim
Imeas
Misc CMRR
Dprog
Ipeak
Resistance Calibrates output resistance High and Low ranges.
Date
Save
LAN
USB
Nvram
Password
Frame
Module
Control Description
Displays the LAN interface settings that are presently active.
Configures the IP addressing of the instrument.
Configures the Dynamic DNS and NetBIOS naming service.
Configures the Domain Name.
Configures the DNS server.
Configures the TCP keepalive function.
Resets the LAN interface settings to the factory-shipped state.
Displays status, speed, packets received, and packets sent.
USB connect string - the instrument's unique USB identifier.
Selects the GPIB address.
Specifies the pin function: DigIn, DigIO, TrigIn, TrigOut, FaultOut.
Specifies the pin function: DigIn, DigIO, TrigIn, TrigOut.
Specifies the pin function: DigIn, DigIO, TrigIn, TrigOut, InhibitIn.
Specifies the pin function: DigIn, DigIO, TrigIn, TrigOut, OnC, OffC.
Specifies the pin polarity: Positive, Negative
Sends/reads data from the digital I/O port
Defines groups of output channels that are connected in parallel.
Configures the display contrast.
Configures the screen saver and wake-on I/O timer.
Selects 1-channel or 4-channel view at turn-on
Enables/disables key clicks and configures the On/Off key.
Locks front panel keys. Enter a password to unlock the front panel.
Enter a password to access the admin functions.
Calibrates High and Low voltage ranges.
Calibrates voltage limit High and Low ranges
Calibrates High, Low, and Aux voltage measurement ranges.
Calibrates High and Low current ranges.
Calibrates current limit.
Calibrates High and Low current measurement ranges.
Calibrates common mode rejection ratio.
Calibrates the downprogrammer.
Calibrates I peak.
Saves the calibration date for each channel.
Saves the calibration data.
Enables/disables the LAN interface and the built-in Web server.
Enables/disables the USB interface.
Resets all non-volatile RAM settings to their factory defaults.
Changes the password for the admin functions.
Displays model, serial number, and firmware revisions.
Displays model, serial number, options, voltage, current, power.
Quick Reference 1
15