General Information; Inspecting The Unit - Agilent Technologies N8700 User Manual

2 Installation

General Information

Models
Items Supplied
Accessories

Inspecting the Unit

16
3.3 kW Models
N8731A – N8739A
N8740A – N8742A
Item Description
Power Cord A power cord appropriate for your location.
Units are supplied with unterminated power cords.
Strain relief assembly A strain relief assembly for unterminated power cords.
AC input cover A cover for the AC input on which the strain relief assembly
is mounted.
Analog connector A DB25 subminiature connector plug for analog control
connections.
Shield assembly A safety shield appropriate for the output terminal
connections (either wire clamp or bus bar).
Hardware Nuts, washers, and bolts for connecting load leads to output
bus bars (only used for 8V to 100V units).
Documentation Set Contains User's Guide with Product Reference CD-ROM.
Certificate of Calibration A certificate of calibration referenced to the serial number.
Automation-Ready E2094N - contains Agilent IO Libraries Suite.
CD-ROM
Item Description
N5740A Rack-mount slide kit for installing in system II cabinets
When you receive your power supply, inspect it for any obvious
damage that may have occurred during shipment. If there is damage,
notify the shipping carrier and nearest Agilent Sales and Service
Office immediately. Refer to Appendix C for more information.
Until you have checked out the power supply, save the shipping
carton and packing materials in case the unit has to be returned.
5 kW Models
N8754A – N8759A
N8760A – N8762A
Series N8700 User's Guide