4.2.4 Left side cover
(1) Open the scanner and top cover.
(2) Open the feeder unit.
(3) Remove the claw ① , and remove the Feeder-Unit without disconnecting the cable.
(4) Remove the two screws (silver, No:42920408) ② and the screw (black,No:42932710) ③ ,
and take off the claws and remove the left side cover ④ .
②
④
②
③
Claw
Claw
Claw
Claw
Claw
Top cover
①
Cable
Feeder Unit
Claw
Claw
4.2.5 Scanner unit
(1) Open the scanner and top cover.
(2) Remove the right side cover.(See section 4.2.3)
(3) Remove the Cover-Side(R-Top) ① .
(4) Remove the Plate-Shield ② .
(5) Remove the all connector of the scanner.
(6) Remove the three E type stop rings ③ and two shafts ⑤ , and remove the
scanner ④ by lift the fulcrum.
Note! Pay attention to the scanner don't drop.
Claw
4. Component replacement
⑤
④
①
③
③
②
75 /