Fonts; Printing; Interface Communications; Physical - Microcom 400 Operator's Manual

Features and Specifications
1.3

FONTS

!
Converted HP LaserJet II™ font compatibility and 8 resident bit mapped fonts, including
OCR-A and OCR-B.
!
All Bit Mapped fonts expandable in height and width
!
Bit Mapped fonts and bar codes in 0, 90, 180, and 270 degree rotations
1.4

PRINTING

!
Optional peel function with label taken sensor and release lever
!
Tag/tear mode advances label to the tear bar
!
Batch mode printing
!
User defined label advancement for special stock or application
!
Label back-up in tag/tear and peel modes
1.5

INTERFACE COMMUNICATIONS

!
Serial: RS-232C, 9-pin female D-Sub connector (DCE) and 2Kbytes buffer
-Flow control: XON/XOFF, CTS/RTS
-Baud rate: 110 to 19200, user-selectable
-Parity: odd, even or none
-Data bits: 7 or 8
!
Parallel (optional): 25-pin female
1.6

PHYSICAL

!
Rigid painted steel construction
!
Height: 5" (127mm)
!
Width: 8.5" (216mm)
!
Depth: 10.5" (267mm)
!
Weight: 12 LBS (5.44 Kg)
1.7

ENVIRONMENT

!
Temperature: 0
!
Humidity: 10-90% non-condensing
4
" "
C to 40 C operating
Chapter 1
400 Operators Manual