Installing On Solaris; Installing On Freebsd - Adaptec Storage Manager User Manual

Installing on Solaris

Note:
If a previous version of Adaptec Storage Manager is installed on your system, you must
remove it before beginning this installation. Any customization files you created with the previous
version are saved and used in the upgrade. To remove Adaptec Storage Manager, type the pkgrm
command.
RaidMan
To install Adaptec Storage Manager on Solaris:
1
Insert the Adaptec RAID Controller Installation DVD.
The DVD mounts automatically. (If it doesn't, manually mount the DVD using a
command similar to the one shown below. Refer to your operating system documentation
for detailed instructions.)
mount -F hsfs -o ro/dev/dsk/c1t0d0s2/mnt
2
Install Adaptec Storage Manager:
pkgadd -d/<mount point>/ASMCD/solaris_x86/manager/StorMan.pkg
3
Follow the on-screen instructions to complete the installation.
4
Eject or unmount the Adaptec RAID Controller Installation DVD. Refer to your operating
system documentation for detailed instructions.

Installing on FreeBSD

To install Adaptec Storage Manager on FreeBSD:
1
Insert the Adaptec RAID Controller Installation DVD.
2
Mount the Adaptec RAID Controller Installation DVD:
mount -F cd9660 -o ro /dev/acd0 /<mount point>
where
mount point
3
Install Adaptec Storage Manager:
For FreeBSD for x86 (32-bit):
pkg_add /<mount point>/ASMCD/freebsd7/manager/StorMan-x86.pkg.tbz
For FreeBSD for amd64 (64-bit):
pkg_add /<mount point>/ASMCD/freebsd7_x86_64/manager/StorMan-amd64.pkg.tbz
where
mount point
Note:
The installation DVD also includes packages for FreeBSD 8.
4
Follow the on-screen instructions to complete the installation.
5
Unmount the Adaptec RAID Controller Installation DVD:
umount /<mount point>
Chapter 2: Installing Adaptec Storage Manager
is the mount point of the DVD-ROM.
is the DVD-ROM mount point.
22
●